unisonic technologies co., ltd utc4013 preliminary cmos ic www.unisonic.com.tw 1 of 5 copyright ? 2015 unisonic technologies co., ltd qw-r502-543.d daul d-type flip-flop ? description the utc4013 is a dual d-type flip-flop which has two independent circuits and each flip-flop features independent data, set, reset, and clock inputs and outputs. the input level applied to data input are transferred to q and q output by rising edge of the clock pulse. when set input is ?h?, and reset input is ?l?, outputs become q=?h? and q =?l?. when set input is ?l? and reset input is ?h?, outputs become q=?l? and q =?h?. when both set input and reset input are at ?h?, outputs become q=?h? and q =?h?. ? features * power supply voltage 3v to 18v * maximum input current of 1u a at 18v over full package temperature * maximum quiescent supply current is 4 a ? ordering information ordering number package packing utc4013g-s14-r sop-14 tape reel utc4013g-p14-r tssop-14 tape reel ? marking sop-14 tssop-14 u t c u t c 4 0 1 3 g 2 3 4 5 67 1 9 10 11 12 13 14 date code lot code 8
utc4013 preliminary cmos ic unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-543.d ? pin configuration q 1 q 1 ck 1 data 1 set 1 reset 1 v ss v dd q 2 q 2 ck 2 data 2 set 2 reset 2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 ? function table inputs outputs reset set data ck* qn+1 q n+1 l h - - h l h l - - l h h h - - h h l l l l h l l h h l l l - no change no change note: - : don?t care * : level change ? logic diagram ? block diagram
utc4013 preliminary cmos ic unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-543.d ? absolute maximum rating ( t a =25 c , unless otherwise specified) parameter symbol ratings unit dc supply voltage v dd v ss -0.5 to v ss +20 v input voltage v in v ss -0.5 to v dd +0.5 v output voltage v out v ss -0.5 to v dd +0.5 v dc input current i in 10 ma power dissipation p d 500 mw operation temperature t opr -40 ~ +85 c storage temperature t stg -65 ~ +150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device operation is not implied. ? recommended operating conditions (v ss =0, t a =25 c ) parameter symbol ratings unit dc supply voltage v dd 3 ~ 18 v input voltage v in 0 ~ v dd v ? d.c. characteristics (v ss =0, t a =25c) parameter symbol test conditions min typ max unit input voltage high v ih v out =0.5v, 4.5v;v dd =5v, O i out O <1 a 3.5 2.75 v v out =1.0v, 9.0v; v dd =10v, O i out O <1 a 7.0 5.5 v out =1.5v, 13.5v; v dd =15v, O i out O <1 a 11.0 8.25 low v il v out =0.5v, 4.5v; v dd =5v, O i out O <1 a 2.25 1.5 v out =1.0v, 9.0v; v dd =10v, O i out O <1 a 4.50 3.0 v out =1.5v, 13.5v; v dd =15v, O i out O <1 a 6.75 4.0 output voltage high v oh v in =v ss , v dd ; O i out O <1 a; v dd =5v 4.95 5.00 v v in =v ss , v dd ; O i out O <1 a; v dd =10v 9.95 10.00 v in =v ss , v dd ; O i out O <1 a; v dd =15v 14.95 15.00 low v ol v in =v ss , v dd ; O i out O <1 a; v dd =5v 0.00 0.05 v in =v ss , v dd ; O i out O <1 a; v dd =10v 0.00 0.05 v in =v ss , v dd ; O i out O <1 a; v dd =15v 0.00 0.05 input current high i ih v ih =18v, v dd =18v 10 -5 0.1 ua low i il v il =0v, v dd =18v -10 -5 -0.1 output current high i oh v oh = 4.6, v in =v ss , v dd ; v dd =5v -0.51 -1.0 ma v oh = 2.5, v in =v ss , v dd ; v dd =5v -2.10 -4.0 v oh = 9.5, v in =v ss , v dd ; v dd =10v -1.30 -2.2 v oh = 13.5, v in =v s s, v dd ; v dd =15v -3.40 -9.0 low i ol v ol = 0.4, v in =v ss , v dd ; v dd =5v 0.51 1.2 v ol = 0.5, v in =v ss , v dd ; v dd =10v 1.30 3.2 v ol = 1.5, v in =v ss , v dd ; v dd =15v 3.40 12.0 quiescent supply current i dd v in =v ss , v dd (note); v dd =5v 0.002 1 ua v in =v ss, v dd (note); v dd =10v 0.004 2 v in =v ss , v dd (note); v dd =15v 0.008 4 note: all valid input combinations.
utc4013 preliminary cmos ic unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-543.d ? a.c. characteristics (v ss =0, t a =25c, c l =50pf) parameter symbol test conditions min typ max unit output transition time low to high t tlh v dd =5v 70 200 ns v dd =10v 35 100 v dd =15v 30 80 high to low t thl v dd =5v 70 200 v dd =10v 35 100 v dd =15v 30 80 propagation delay time (ck ? q, q ) t plh t phl v dd =5v 130 300 v dd =10v 65 130 v dd =15v 50 90 propagation delay time (set, reset ? q, q ) t plh v dd =5v 110 300 v dd =10v 50 130 v dd =15v 40 90 t phl v dd =5v 110 300 v dd =10v 50 130 v dd =15v 40 90 max. clock frequency f cl v dd =5v 3.5 8.0 mhz v dd =10v 8.0 16.0 v dd =15v 12.0 20.0 max. clock input rise time t rcl v dd =5v no limit s v dd =10v v dd =15v max. clock input fall time t fcl v dd =5v no limit s v dd =10v v dd =15v min. pulse width (set, reset) t w v dd =5v 60 180 ns v dd =10v 30 80 v dd =15v 25 50 min. clock pulse width t w v dd =5v 60 140 v dd =10v 30 60 v dd =15v 25 40 min. set-up time (data - ck) t su v dd =5v 40 ns v dd =10v 20 v dd =15v 15 min. hold time (data-ck) t h v dd =5v 20 40 v dd =10v 10 20 v dd =15v 6 15 min. removal time (set, reset-ck) t rem v dd =5v 40 v dd =10v 20 v dd =15v 15 input capacitance c in 5 7.5 pf
utc4013 preliminary cmos ic unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-543.d ? parameter measurement information set reset q t plh 50% 50% t phl 20ns 50% 50% 50% t w 10% 90% 90% 10% 20ns 10% 90% 20ns 20ns 10% 90% 50% t w 2. set-reset, q utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
